Product added to cart
101-B34
High stock - 2000 qty
Stock europe
Stock europe
SKU
101-B34-QT
FITTINGS B34 (ø 33.9mm) :
90° butt joint, often used to join intermediate uprights to top rails and middle rails to end uprights on level sites. This Interclamp cannot be used where through tube (horizontal in photo) has to be joined within the fitting (see 104).
- Recommended outside diameter tube : 33.7mm (1").
- Outside diameter range allowed : 32-35mm.
- Galvanized : double corrosion protection.
- Weather resistance : int & out.
- Finish : zinc coating.
- Recommended outside diameter tube : 33.7mm (1").
- Outside diameter range allowed : 32-35mm.
- Galvanized : double corrosion protection.
- Weather resistance : int & out.
- Finish : zinc coating.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
1 - INFOS SHORT TEE 101-B34.
2 - INFOS SHIPPING.
3 - CLAMP FITTING 101-B34.
4 - INFOS FITTINGS.
SIZE CONVERSION :
- Kee Klamp : model 10-6
- Interclamp : 101-B34
- Tubeclamps : 101B
90° butt joint, often used to join intermediate uprights to top rails and middle rails to end uprights on level sites. This Interclamp cannot be used where through tube (horizontal in photo) has to be joined within the fitting (see 104).
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanized (BS EN ISO 1461).
External appearance : industrial shiny.
Double corrosion protection : zinc coating.
Axial load with stop screw : 500kg / 40Nm*.
Weather resistance : int & out.
Fittings are : TUV approved.
Sold individually : yes.
Hot-dipped galvanized (BS EN ISO 1461).
External appearance : industrial shiny.
Double corrosion protection : zinc coating.
Axial load with stop screw : 500kg / 40Nm*.
Weather resistance : int & out.
Fittings are : TUV approved.
Sold individually : yes.
Clamp strength :
Outdoor resistance :
Ageing over time :
Outdoor resistance :
Ageing over time :
Depending on the dimensions and total weight of your package, the delivery price changes according to the following 4 categories : SMALL / MEDIUM /LARGE / XXL.
SMALL
CLAMPS
CLAMPS
Clamps.
No tubes.
50kg max.
Free shipping*.
* see conditions.
MEDIUM
TUBES
TUBES
Clamps + tubes.
Tubes < 2m.
50kg max.
LARGE
HEAVY LOURD
HEAVY LOURD
Clamps + tubes.
Tubes > 2m.
100kg max.
XXL
PALLET
PALLET
Clamps + tubes.
Pallet shipping.
1000kg max.
Below is the technical characteristics table of the 101-B34 interclamp fitting. These values are given according to size, with additional information such as weight and the diameter of the holes (when present).
Size (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 | 41 | 0.20 | |||||
B34 | 46 | 0.32 | |||||
C42 | 60 | 0.48 | |||||
D48 | 68 | 0.57 | |||||
E60 | 84 | 0.89 |
Size : fitting model.
A/B/C/D/E : dimension (mm).
Ø : hole diameter (mm).
Kg : fitting weight (kg).
Below is the general information table on tubular fittings. These values are given according to their sizes, with additional information such as the screw threads or the nominal diameter of the recommended pipes.
SIZE CONVERSION :
- Kee Klamp : model 10-6
- Interclamp : 101-B34
- Tubeclamps : 101B
Size | Key size | Screw size | Ø OD | Ø NB |
---|---|---|---|---|
A27 | 1/4" | 1/4" | 26.9mm | 3/4" |
B34 | 1/4" | 1/4" | 33.7mm | 1" |
C42 | 5/16" | 3/8" | 42.4mm | 1¼" |
D48 | 5/16" | 3/8" | 48.3mm | 1½" |
E60 | 5/16" | 3/8" | 60.3mm | 2" |
Size : fitting model.
Key size : hex key 6 pans (inch).
Screw size : BSP thread size (inch).
Ø OD : fits pipe outer diameter (mm).
Ø NB : fits pipe nominal bore (inch).
Product code | 101-B34 |
---|---|
Product variant | JM101-B34 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | A27 |
For tube size | 33.7 mm |
Size allen key | 1/4" inch |
Clamps angle | 90° |
Sold individually | Yes |
Box quantity | 84 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
Write Your Own Review