Product added to cart
101-E60
High stock - 2000 qty
Stock europe
Stock europe
SKU
101-E60-QT
FITTINGS E60 (ø 60.3mm) :
90° butt joint, often used to join intermediate uprights to top rails and middle rails to end uprights on level sites. This Interclamp cannot be used where through tube (horizontal in photo) has to be joined within the fitting (see 104).
- Recommended outside diameter tube : 60.3mm (2").
- Outside diameter range allowed : 59-61mm.
- Finish : zinc coating.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
SHORT TEE :
TABLEAU DES DIMENSIONS :
90° butt joint, often used to join intermediate uprights to top rails and middle rails to end uprights on level sites. This Interclamp cannot be used where through tube (horizontal in photo) has to be joined within the fitting (see 104).
- This fitting is recommended to fit outer ø tube : 60.3mm (2").
- This fitting can fit within outer ø tube : 59-61mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | 41 | 0.20 | |||||
B34 (1") | 46 | 0.32 | |||||
C42 (1¼") | 60 | 0.48 | |||||
D48 (1½") | 68 | 0.57 | |||||
E60 (2") | 84 | 0.89 |
Product code | 101-E60 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | E60 |
For tube size | 60.3 mm |
Size allen key | 5/16" inch |
Clamps angle | 90° |
Sold individually | Yes |
Box quantity | 22 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
We found other products you might like!
Write Your Own Review