Product added to cart
148-A27
High stock - 2000 qty
Stock europe
Stock europe
SKU
148-A27-QT
FITTINGS A27 (ø 26.9mm) :
Fitting 148-A27 type swivel short tee, usually used in pairs. Although the photo shows two fittings, this item is sold and priced individually. The through tube (vertical in photo) cannot be joined within the fitting.
WARNING: Image shows 2 fittings.
- This fitting is recommended to fit outer ø tube : 26.9mm (3/4").
- This fitting can fit within outer ø tube : 26-28mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Swivel Short Tee :
TABLEAU DES DIMENSIONS :
Fitting 148-A27 type swivel short tee, usually used in pairs. Although the photo shows two fittings, this item is sold and priced individually. The through tube (vertical in photo) cannot be joined within the fitting.
WARNING: Image shows 2 fittings.
- This fitting is recommended to fit outer ø tube : 26.9mm (3/4").
- This fitting can fit within outer ø tube : 26-28mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | 53 | 0.19 | |||||
B34 (1") | 59 | 0.29 | |||||
C42 (1¼") | 73 | 0.45 | |||||
D48 (1½") | 93 | 0.66 | |||||
E60 (2") | 110 | 1.01 |
Product code | 148-A27 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | A27 |
For tube size | 26.9 mm |
Size allen key | 1/4" inch |
Sold individually | Yes |
Box quantity | 168 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
We found other products you might like!
Write Your Own Review