Product added to cart
132-B34
High stock - 2000 qty
Stock europe
Stock europe
SKU
132-B34-QT
FITTINGS B34 (ø 33.9mm) :
Fitting 132-B34 type base flange for uprights on level sites. Usually used as a railing base flange. Fixing holes suit a wide range of common mechanical and chemical masonry anchors.
WARNING: The fitting should be fitted so that the fixing holes are in line with the applied load.
- This fitting is recommended to fit outer ø tube : 33.7mm (1").
- This fitting can fit within outer ø tube : 32-35mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Railing Base Flange :
TABLEAU DES DIMENSIONS :
Fitting 132-B34 type base flange for uprights on level sites. Usually used as a railing base flange. Fixing holes suit a wide range of common mechanical and chemical masonry anchors.
WARNING: The fitting should be fitted so that the fixing holes are in line with the applied load.
- This fitting is recommended to fit outer ø tube : 33.7mm (1").
- This fitting can fit within outer ø tube : 32-35mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | 60 | 105 | 76 | 52 | 11 | 0.39 | |
B34 (1") | 71 | 127 | 89 | 62 | 15 | 0.65 | |
C42 (1¼") | 84 | 139 | 101 | 72 | 15 | 0.88 | |
D48 (1½") | 89 | 152 | 114 | 86 | 15 | 1.17 | |
E60 (2") | 104 | 165 | 127 | 96 | 18 | 1.59 |
Product code | 132-B34 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | B34 |
For tube size | 33.7 mm |
Size allen key | 1/4" inch |
Sold individually | Yes |
Box quantity | 45 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
We found other products you might like!
Write Your Own Review