Product added to cart
JM150-A27-RW
High stock - 2000 qty
Stock europe
Stock europe
SKU
JM150-A27-RW-QT
FITTINGS A27 (ø 26.9mm) :
Fitting JM150-A27-RW type internal expanding joint. A straight fitting for joining tubes of the same size. Ideal for building an outdoor bench. This fitting can only be used for 3.25mm wall thickness tube (1”, 1 1/4” & 1 1/2” BS EN 10255, formerly BS 1387, medium weight) and must not be used as a load bearing joint, particularly for tensile loads. Type 149, which has superior load characteristics, may sometimes be used as an alternative.
- Recommended outside diameter tube : 26.9mm (3/4").
- Outside diameter range allowed : 26-28mm.
- Weather resistance : int & out.
- Finish : raw.
- Recommended outside diameter tube : 26.9mm (3/4").
- Outside diameter range allowed : 26-28mm.
- Weather resistance : int & out.
- Finish : raw.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
1 - INFOS EXTERNAL SLEEVE JOINT JM150-A27-RW.
2 - INFOS SHIPPING.
3 - CLAMP FITTING JM150-A27.
![schema raccords](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 325 315" width="325" height="315"></svg>)
4 - INFOS FITTINGS.
SIZE CONVERSION :
- Kee Klamp : model 18-5
- Interclamp : 150-A27
- Tubeclamps : 150A
Fitting JM150-A27-RW type internal expanding joint. A straight fitting for joining tubes of the same size. Ideal for building an outdoor bench. This fitting can only be used for 3.25mm wall thickness tube (1”, 1 1/4” & 1 1/2” BS EN 10255, formerly BS 1387, medium weight) and must not be used as a load bearing joint, particularly for tensile loads. Type 149, which has superior load characteristics, may sometimes be used as an alternative.
Iron clamp fittings.
Hot-dipped galvanized.
External appearance : industrial raw.
Single corrosion protection : galvanized.
Axial load with stop screw : 500kg / 40Nm*.
Weather resistance : int & out.
Fittings are : TUV approved.
Sold individually : yes.
Hot-dipped galvanized.
External appearance : industrial raw.
Single corrosion protection : galvanized.
Axial load with stop screw : 500kg / 40Nm*.
Weather resistance : int & out.
Fittings are : TUV approved.
Sold individually : yes.
Depending on the dimensions and total weight of your package, the delivery price changes according to the following 4 categories : SMALL / MEDIUM /LARGE / XXL.
SMALL
CLAMPS
CLAMPS
Clamps.
No tubes.
50kg max.
MEDIUM
TUBES
TUBES
Clamps + tubes.
Tubes < 2m.
50kg max.
LARGE
HEAVY LOURD
HEAVY LOURD
Clamps + tubes.
Tubes > 2m.
100kg max.
XXL
PALLET
PALLET
Clamps + tubes.
Pallet shipping.
1000kg max.
Below is the technical characteristics table of the JM150-A27 fitting. These values are given according to size, with additional information such as weight and the diameter of the holes (when present).
| Size (mm) | A | B | C | D | E | ø | Kg |
|---|---|---|---|---|---|---|---|
| A27 | 76 | 22 | 0.24 | ||||
| B34 | 78 | 20 | 0.24 | ||||
| C42 | 78 | 20 | 0.36 | ||||
| D48 | 78 | 20 | 0.43 | ||||
| E60 |
Size : fitting model.
A/B/C/D/E : dimension (mm).
Ø : hole diameter (mm).
Kg : fitting weight (kg).
Below is the general information table on tubular fittings. These values are given according to their sizes, with additional information such as the screw threads or the nominal diameter of the recommended pipes.
SIZE CONVERSION :
- Kee Klamp : model 18-5
- Interclamp : 150-A27
- Tubeclamps : 150A
| Size | Key size | Screw size | Ø OD | Ø NB |
|---|---|---|---|---|
| A27 | 1/4" | 1/4" | 26.9mm | 3/4" |
| B34 | 1/4" | 1/4" | 33.7mm | 1" |
| C42 | 5/16" | 3/8" | 42.4mm | 1¼" |
| D48 | 5/16" | 3/8" | 48.3mm | 1½" |
| E60 | 5/16" | 3/8" | 60.3mm | 2" |
Size : fitting model.
Key size : hex key 6 pans (inch).
Screw size : BSP thread size (inch).
Ø OD : fits pipe outer diameter (mm).
Ø NB : fits pipe nominal bore (inch).
| Model | External sleeve joint |
|---|---|
| Product code | JM150-A27-RW |
| Product variant | JM150-A27 |
| Clamps brand | © Jmclamp |
| Clamps material | Malleable iron |
| Clamps surface | HD galvanised |
| Clamps finished surface | Raw |
| Clamps warranty | 5 years |
| Clamps resistance | Indoor & outdoor |
| Clamps size | A27 |
| For tube size | 26.9 mm |
| Size allen key | 1/4" inch |
| Sold individually | Yes |
| Box quantity | 130 |
Write Your Own Review