Product added to cart
161-A27
High stock - 2000 qty
Stock europe
Stock europe
SKU
161-A27-QT
FITTINGS A27 (ø 26.9mm) :
Designed to form a 90° crossover joint between two tubes, this fitting can reduce the need for cutting on horizontal rails. To add to existing structures, types 137 and 160 can often be used as alternatives.
- This fitting is recommended to fit outer ø tube : 26.9mm (3/4").
- This fitting can fit within outer ø tube : 26-28mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Crossover :
TABLEAU DES DIMENSIONS :
![schema raccords](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 325 315" width="325" height="315"></svg>)
Designed to form a 90° crossover joint between two tubes, this fitting can reduce the need for cutting on horizontal rails. To add to existing structures, types 137 and 160 can often be used as alternatives.
- This fitting is recommended to fit outer ø tube : 26.9mm (3/4").
- This fitting can fit within outer ø tube : 26-28mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
| Taille (mm) | A | B | C | D | E | ø | Kg |
|---|---|---|---|---|---|---|---|
| A27 (¾") | 31.5 | 38 | 0.22 | ||||
| B34 (1") | 38.5 | 41 | 0.33 | ||||
| C42 (1¼") | 46 | 49.5 | 0.50 | ||||
| D48 (1½") | 51 | 55 | 0.57 | ||||
| E60 (2") | 61 | 67 | 0.89 |
| Product code | 161-A27 |
|---|---|
| Product variant | 0 |
| Clamps brand | © Interclamp |
| Clamps material | Malleable iron (BS EN 1562:1997) |
| Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
| Clamps finished surface | Zinc |
| Clamps warranty | 5 years |
| Clamps corrosion warranty | 20 years |
| Clamps resistance | Indoor & outdoor |
| Clamps size | A27 |
| For tube size | 26.9 mm |
| Size allen key | 1/4" inch |
| Clamps angle | 90° |
| Sold individually | Yes |
| Box quantity | 192 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
We found other products you might like!
Write Your Own Review