Product added to cart
135-A27
High stock - 2000 qty
Stock europe
Stock europe
SKU
135-A27-QT
FITTINGS A27 (ø 26.9mm) :
Fitting 135-A27 type 90° bolt-on joint, often used to make additions or alterations to existing structures where a type 101 or similar cannot be fitted. Usually used as an clamp-on tee. Type 136 is a similar clamp-on fitting offering a more flush finish. The through tube (horizontal in photo) cannot be joined within the fitting.
- This fitting is recommended to fit outer ø tube : 26.9mm (3/4").
- This fitting can fit within outer ø tube : 26-28mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Clamp-on Tee (1 Bolt) :
TABLEAU DES DIMENSIONS :
Fitting 135-A27 type 90° bolt-on joint, often used to make additions or alterations to existing structures where a type 101 or similar cannot be fitted. Usually used as an clamp-on tee. Type 136 is a similar clamp-on fitting offering a more flush finish. The through tube (horizontal in photo) cannot be joined within the fitting.
- This fitting is recommended to fit outer ø tube : 26.9mm (3/4").
- This fitting can fit within outer ø tube : 26-28mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | 51 | 0.30 | |||||
B34 (1") | 52.5 | 0.36 | |||||
C42 (1¼") | 67 | 0.53 | |||||
D48 (1½") | 76.5 | 0.60 | |||||
E60 (2") | 91 | 0.98 |
Product code | 135-A27 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | A27 |
For tube size | 26.9 mm |
Size allen key | 1/4" inch |
Clamps angle | 90° |
Sold individually | Yes |
Box quantity | 108 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
We found other products you might like!
Write Your Own Review