Product added to cart
119-E60
High stock - 2000 qty
Stock europe
Stock europe
SKU
119-E60-QT
FITTINGS E60 (ø 60.3mm) :
90° joint, often used between middle rail and uprights on level sites and often paired with type 101 or 104. The through tube (vertical in photo) cannot be joined within the fitting.
- Recommended outside diameter tube : 60.3mm (2").
- Outside diameter range allowed : 59-61mm.
- Finish : zinc coating.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
CROSS MIDDLE RAIL :
TABLEAU DES DIMENSIONS :
90° joint, often used between middle rail and uprights on level sites and often paired with type 101 or 104. The through tube (vertical in photo) cannot be joined within the fitting.
- This fitting is recommended to fit outer ø tube : 60.3mm (2").
- This fitting can fit within outer ø tube : 59-61mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | 82 | 0.27 | |||||
B34 (1") | 92 | 0.39 | |||||
C42 (1¼") | 120 | 0.65 | |||||
D48 (1½") | 135 | 0.75 | |||||
E60 (2") | 168 | 1.23 |
Product code | 119-E60 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | E60 |
For tube size | 60.3 mm |
Size allen key | 5/16" inch |
Clamps angle | 90° |
Sold individually | Yes |
Box quantity | 10 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
We found other products you might like!
Write Your Own Review