Product added to cart
JM104-C42-RW
High stock - 2000 qty
Stock europe
Stock europe
SKU
JM104-C42-RW-QT
FITTINGS C42 (ø 42.4mm) :
90° joint, often used to join intermediate uprights to top rails on level sites. This industrial safety handrails fitting JM104-C42-RW can be used where through tube (horizontal in photo) has to be joined within the fitting. Where such a joint is not required, type 101 can often be used as an alternative.
- Recommended outside diameter tube : 42.4mm (1.1/4").
- Outside diameter range allowed : 41-43mm.
- Weather resistance : int & out.
- Finish : raw.
- Recommended outside diameter tube : 42.4mm (1.1/4").
- Outside diameter range allowed : 41-43mm.
- Weather resistance : int & out.
- Finish : raw.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
1 - INFOS LONG TEE JM104-C42-RW.
2 - INFOS SHIPPING.
3 - CLAMP FITTING JM104-C42.
4 - INFOS FITTINGS.
SIZE CONVERSION :
- Kee Klamp : model 25-7
- Interclamp : 104-C42
- Tubeclamps : 104C
90° joint, often used to join intermediate uprights to top rails on level sites. This industrial safety handrails fintting JM104-C42-RW can be used where through tube (horizontal in photo) has to be joined within the fitting. Where such a joint is not required, type 101 can often be used as an alternative.
Iron clamp fittings.
Hot-dipped galvanized.
External appearance : industrial raw.
Single corrosion protection : galvanized.
Axial load with stop screw : 500kg / 40Nm*.
Weather resistance : int & out.
Fittings are : TUV approved.
Sold individually : yes.
Hot-dipped galvanized.
External appearance : industrial raw.
Single corrosion protection : galvanized.
Axial load with stop screw : 500kg / 40Nm*.
Weather resistance : int & out.
Fittings are : TUV approved.
Sold individually : yes.
Depending on the dimensions and total weight of your package, the delivery price changes according to the following 4 categories : SMALL / MEDIUM /LARGE / XXL.
SMALL
CLAMPS
CLAMPS
Clamps.
No tubes.
50kg max.
MEDIUM
TUBES
TUBES
Clamps + tubes.
Tubes < 2m.
50kg max.
LARGE
HEAVY LOURD
HEAVY LOURD
Clamps + tubes.
Tubes > 2m.
100kg max.
XXL
PALLET
PALLET
Clamps + tubes.
Pallet shipping.
1000kg max.
Below is the technical characteristics table of the JM104-C42 fitting. These values are given according to size, with additional information such as weight and the diameter of the holes (when present).
Size (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 | 41 | 82 | 0.35 | ||||
B34 | 46 | 92 | 0.51 | ||||
C42 | 60 | 120 | 0.85 | ||||
D48 | 68 | 136 | 0.98 | ||||
E60 | 84 | 168 | 1.65 |
Size : fitting model.
A/B/C/D/E : dimension (mm).
Ø : hole diameter (mm).
Kg : fitting weight (kg).
Below is the general information table on tubular fittings. These values are given according to their sizes, with additional information such as the screw threads or the nominal diameter of the recommended pipes.
SIZE CONVERSION :
- Kee Klamp : model 25-7
- Interclamp : 104-C42
- Tubeclamps : 104C
Size | Key size | Screw size | Ø OD | Ø NB |
---|---|---|---|---|
A27 | 1/4" | 1/4" | 26.9mm | 3/4" |
B34 | 1/4" | 1/4" | 33.7mm | 1" |
C42 | 5/16" | 3/8" | 42.4mm | 1¼" |
D48 | 5/16" | 3/8" | 48.3mm | 1½" |
E60 | 5/16" | 3/8" | 60.3mm | 2" |
Size : fitting model.
Key size : hex key 6 pans (inch).
Screw size : BSP thread size (inch).
Ø OD : fits pipe outer diameter (mm).
Ø NB : fits pipe nominal bore (inch).
Model | Long tee |
---|---|
Product code | JM104-C42-RW |
Product variant | JM104-C42 |
Clamps brand | © Jmclamp |
Clamps material | Malleable iron |
Clamps surface | HD galvanised |
Clamps finished surface | Raw |
Clamps warranty | 5 years |
Clamps resistance | Indoor & outdoor |
Clamps size | C42 |
For tube size | 42.4 mm |
Size allen key | 5/16" inch |
Clamps angle | 90° |
Sold individually | Yes |
Box quantity | 20 |
Write Your Own Review