Product added to cart
134-C42
High stock - 2000 qty
Stock europe
Stock europe
SKU
134-C42-QT
FITTINGS C42 (ø 42.4mm) :
Fitting 134-C42 type ground socket. Usually used as a anchor in the ground. A setscrew allows the upright to be removed when required, the fitting remaining cast in place.
- This fitting is recommended to fit outer ø tube : 42.4mm (1.1/4").
- This fitting can fit within outer ø tube : 41-43mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Ground Socket :
TABLEAU DES DIMENSIONS :
Fitting 134-C42 type ground socket. Usually used as a anchor in the ground. A setscrew allows the upright to be removed when required, the fitting remaining cast in place.
- This fitting is recommended to fit outer ø tube : 42.4mm (1.1/4").
- This fitting can fit within outer ø tube : 41-43mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | |||||||
B34 (1") | 113 | 122 | 127 | 1.92 | |||
C42 (1¼") | 125.5 | 135 | 139 | 2.60 | |||
D48 (1½") | 124.5 | 135 | 139 | 2.50 | |||
E60 (2") |
Product code | 134-C42 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | C42 |
For tube size | 42.4 mm |
Size allen key | 5/16" inch |
Sold individually | Yes |
Box quantity | 12 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
We found other products you might like!
Write Your Own Review