Product added to cart
140-C42
High stock - 2000 qty
Stock europe
Stock europe
SKU
140-C42-QT
FITTINGS C42 (ø 42.4mm) :
Fitting 140-C42 type gate hinge pin. Usually used as an gate hinge. Often used with type 138 to form gate hinges. The tube cannot be joined within the fitting.
- This fitting is recommended to fit outer ø tube : 42.4mm (1.1/4").
- This fitting can fit within outer ø tube : 41-43mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Gate Hinge Pin :
TABLEAU DES DIMENSIONS :
Fitting 140-C42 type gate hinge pin. Usually used as an gate hinge. Often used with type 138 to form gate hinges. The tube cannot be joined within the fitting.
- This fitting is recommended to fit outer ø tube : 42.4mm (1.1/4").
- This fitting can fit within outer ø tube : 41-43mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | 30 | 25.5 | 38 | 12 | 0.25 | ||
B34 (1") | 33 | 25.5 | 38 | 12 | 0.28 | ||
C42 (1¼") | 38 | 25 | 38 | 12 | 0.29 | ||
D48 (1½") | 41 | 25 | 38 | 12 | 0.30 | ||
E60 (2") |
Product code | 140-C42 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | C42 |
For tube size | 42.4 mm |
Size allen key | 5/16" inch |
Sold individually | Yes |
Box quantity | 150 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
We found other products you might like!
Write Your Own Review