Product added to cart
161-E60/D48
High stock - 2000 qty
Stock europe
Stock europe
SKU
161-E60-D48-QT
FITTINGS E60/D48 (ø 60.3/48.3mm) :
Designed to form a 90° crossover joint between two tubes of different sizes.
- This fitting is recommended to fit outer ø tube : 60.3/48.3mm (2" & 1.1/2").
- This fitting can fit within outer ø tube : 59-61/47-49mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
:
TABLEAU DES DIMENSIONS :
Designed to form a 90° crossover joint between two tubes of different sizes.
- This fitting is recommended to fit outer ø tube : 60.3/48.3mm (2" & 1.1/2").
- This fitting can fit within outer ø tube : 59-61/47-49mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | 31.5 | 38 | 0.22 | ||||
B34 (1") | 38.5 | 41 | 0.33 | ||||
C42 (1¼") | 46 | 49.5 | 0.50 | ||||
D48 (1½") | 51 | 55 | 0.57 | ||||
E60 (2") | 61 | 67 | 0.89 |
Product code | 161-E60/D48 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | E60/D48 |
For tube size | 48.3 mm, 60.3 mm |
Size allen key | 5/16" inch |
Clamps angle | 90° |
Sold individually | Yes |
Box quantity | 28 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
Write Your Own Review