Product added to cart
165-E60
High stock - 2000 qty
Stock europe
Stock europe
SKU
165-E60-QT
FITTINGS E60 (ø 60.3mm) :
Often used in racking and similar structures, the fitting allows both uprights and front and rear horizontal rails to be continuous. It is usually preferable for the upright to be on the outside of the structure (as per the photo) for maximum stability. The through tubes cannot be joined within the fitting.
- This fitting is recommended to fit outer ø tube : 60.3mm (2").
- This fitting can fit within outer ø tube : 59-61mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Combined Tee & Crossover :
TABLEAU DES DIMENSIONS :
Often used in racking and similar structures, the fitting allows both uprights and front and rear horizontal rails to be continuous. It is usually preferable for the upright to be on the outside of the structure (as per the photo) for maximum stability. The through tubes cannot be joined within the fitting.
- This fitting is recommended to fit outer ø tube : 60.3mm (2").
- This fitting can fit within outer ø tube : 59-61mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | |||||||
B34 (1") | 46 | 40 | 0.48 | ||||
C42 (1¼") | 60 | 49 | 0.69 | ||||
D48 (1½") | 68 | 55 | 0.86 | ||||
E60 (2") | 84 | 68 | 1.33 |
Product code | 165-E60 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | E60 |
For tube size | 60.3 mm |
Size allen key | 5/16" inch |
Clamps angle | 90° |
Sold individually | Yes |
Box quantity | 15 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
Write Your Own Review