Product added to cart
160-E60
High stock - 2000 qty
Stock europe
Stock europe
SKU
160-E60-QT
FITTINGS E60 (ø 60.3mm) :
Designed to form a 90° joint between two tubes. Often used to add to existing structures. Type 137 can often be used as a clamp-on alternative, or type 161 can often be used as an alternative on new structures.
- This fitting is recommended to fit outer ø tube : 60.3mm (2").
- This fitting can fit within outer ø tube : 59-61mm.
- Setscrew should be tightened to : 40Nm*.
Buy now and pay later with paypal. More...
Sold and shipped by tubeclampstore.
Secure payment with mollie.
Sold and shipped by tubeclampstore.
Secure payment with mollie.
:
TABLEAU DES DIMENSIONS :
Designed to form a 90° joint between two tubes. Often used to add to existing structures. Type 137 can often be used as a clamp-on alternative, or type 161 can often be used as an alternative on new structures.
- This fitting is recommended to fit outer ø tube : 60.3mm (2").
- This fitting can fit within outer ø tube : 59-61mm.
- Setscrew should be tightened to : 40Nm*.
- Weather resistance : int & out.
- Screws on clamp are included.
Taille (mm) | A | B | C | D | E | ø | Kg |
---|---|---|---|---|---|---|---|
A27 (¾") | 28 | 0.17 | |||||
B34 (1") | 34 | 0.28 | |||||
C42 (1¼") | 43.5 | 0.43 | |||||
D48 (1½") | 49.5 | 0.56 | |||||
E60 (2") | 61 | 0.84 |
Product code | 160-E60 |
---|---|
Product variant | 0 |
Clamps brand | © Interclamp |
Clamps material | Malleable iron (BS EN 1562:1997) |
Clamps surface | HD galvanised (BS EN ISO 1461:1999) |
Clamps finished surface | Zinc |
Clamps warranty | 5 years |
Clamps corrosion warranty | 20 years |
Clamps resistance | Indoor & outdoor |
Clamps size | E60 |
For tube size | 60.3 mm |
Size allen key | 5/16" inch |
Clamps angle | 90° |
Sold individually | Yes |
Box quantity | 30 |
-
Iron clamp fittings (BS EN 1562:1997).
Hot-dipped galvanised (BS EN ISO 1461).
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : Yes.
Fittings are TUV approved.
Production time : (2/3 days).
Sold individually : Yes.
-
Iron clamp fittings.
Hot-dipped galvanised.
Zinc coating : Double corrosion protection.
Axial load with stop screw : 500kg / 40Nm.
DDA compliant handrail range : No.
Fittings are TUV approved.
Production time : (0/1 days).
Sold individually : Yes.
Write Your Own Review